Pagina se încarcă... vă rugăm așteptați!



Afișarea paginii întârzie? Clic aici
 
Pagina de start a forumului razvan.bocu.ro / forum.bocu.ro razvan.bocu.ro / forum.bocu.ro
IT si diverse
 
 AcasăAcasă   LinkuriLinkuri   FAQFAQ   CăutareCăutare   MembriMembri   GrupuriGrupuri   AlbumAlbum   ÎnregistrareÎnregistrare 
 ProfilProfil   SudokuSudoku    Mesaje privateMesaje private   Hartă Site(pseudo)Hartă Site(pseudo)    AutentificareAutentificare 

Excessive Shrinking

 
Crează un subiect nou   Răspunde la subiect    Pagina de start a forumului razvan.bocu.ro / forum.bocu.ro -> Ultimele noutati in timp real
Subiectul anterior :: Subiectul următor  
Autor Mesaj
upamfva
Initiat
Initiat


Vârsta: 36
Data înscrierii: 30/Noi/2021
Mesaje: 1102
Cuvinte scrise: 472,412
Sexul: Nespecificat


MesajTrimis: Lun Dec 26, 2022 9:01 am    Titlul subiectului: Excessive Shrinking Răspunde cu citat (quote)

Excessive Shrinking

Remedies: Decreasing the barrel temperature allows the molecules and voids to expand and contract normally and provide consistent shrinkage values. Shrinkage is impossible to predict accurately, but keeping the material and mold temperatures at the right settings (as recommended by the material suppliers) will minimize the effective shrinkage.Get more news about Shrinkless Expanding Machine,you can vist our website!

◇ INSUFFICIENT INJECTION PRESSURE OR TIME

Remedies: Increase the amount of pressure or the time applied. Upon initial startup, the mold should be filled incrementally starting with intentional short shots (if the mold design allows) and progressively increasing pressure shot-by-shot until the mold is filled and packed properly. Then, parts should be inspected for critical dimensions. If the mold is new, and dimensions are incorrect, the mold should be returned to the moldmaker for adjustments. If the mold has already been in production and the dimensions are wrong, process parameters can be adjusted to make the part shrink less or more, whichever is required.

◇ INADEQUATE COOLING TIME
Remedies: Adjust the cooling time portion of the cycle. It is true that longer cycles make the part more expensive but there is a minimum amount of time required for the resin to form a proper skin. It depends on what material is being molded. A general rule-of-thumb for a part with a wall thickness of 0.100'', the cooling time should be 20 seconds. The overall cycle would then be 25-30 seconds.

◇ INSUFFICIENT CUSHION AND/OR HOLD TIME
Remedies: Maintain a cushion that is somewhere between 1/8'' and 1/4'' at the end of the injection stroke. This provides something against which hold pressure can be applied. The amount of time for holding pressure should be long enough for the gate to freeze, normally 3-4 seconds.

◇ EXCESSIVE NON-RETURN VALVE CLEARANCE
Remedies: Inspect the non-return valve mechanism and replace worn or damaged components. This wear is normal but is accelerated by molding materials that have reinforcements (such as glass) in them. The valve should be inspected at least every three months.
Sus
upamfva este deconectat Vezi profilul utilizatorului Trimite mesaj privat
Afișează mesajele pentru a le previzualiza:   
Crează un subiect nou   Răspunde la subiect    Pagina de start a forumului razvan.bocu.ro / forum.bocu.ro -> Ultimele noutati in timp real Ora este GMT + 2 ore
Pagina 1 din 1

 
Mergi direct la:  
Nu puteți crea un subiect nou în acest forum
Nu puteți răspunde în subiectele acestui forum
Nu puteți modifica mesajele proprii din acest forum
Nu puteți șterge mesajele proprii din acest forum
Nu puteți vota în chestionarele din acest forum
Nu puteți atașa fișiere în acest forum
Nu puteți descărca fișiere în acest forum
Referință subiect (Stil MLA)
"Excessive Shrinking." Mesaj online. Lun Dec 26, 2022 9:01 am. razvan.bocu.ro / forum.bocu.ro.
Vin Mar 29, 2024 5:29 pm. < http://forum.bocu.ro/viewtopic.php?t=76625 >.




Securitate forum

95579 Atacuri blocate

Powered by BOCU.ro © 2001, 2005 phpBB Group
Varianta în limba română: Romanian phpBB online community / Razvan Bocu <<< razvan@bocu.ro >>>

Uptime server: 38 zile, 18 ore, 25 minute | Încărcare medie: 0.78, 0.77, 0.71

Server uptime(last month)